Wakeboard Ballast * | Johnson Talulah High Flow Premium Impeller (08-849P-2)

This Impeller Is The Replacement Impeller For The Johnson Talulah High Flow Reversible Ballast Pump (250Lbs/Min) .

Impeller Replacement Instructions:

• Step 1: Remove Five Of The Front Cover Screws. (Note: Retain The Screws For The Reinstallation Process) Swing The Cover Up And Out Of The Way To Allow Access To The Impeller Location. The Impeller May Be Black, Yellow Or Green Depending On The Age And Manufacturer.
• Step 2: Using Needle-Nose Pliers, Pull The Old Impeller Out Of The Casing.
• Step 3: Install The New Impeller By Gently Squeezing The Vanes Of The Impeller. It Is Intentionally Larger Than The Case So They Vanes Will Be Forced To Deform To Fit. Don’T Worry, That’S Normal And As Soon As The Pump Is Run They Will All Align In The Correct Orientation.
• Step 4: Slide The Plate Back Into Place. No Silicone Is Necessary Due To The Built-In Gasket, Tightening The Screws Should Prevent Leakage.