Propellers & Accessories * | Acme C-Clamp Prop Puller (Open Box)

Remove Your Prop The Easy Way With This Industrial Strength Traditional Style Prop Puller. Makes Easy Work Of Even The Most Stubborn Props So You Can Get On With Enjoying Your Time On The Water, Instead Of Laying On The Ground Fighting With A Stuck Prop. The Acme C-Clamp Prop Puller Comes In Two Different Sizes: One That Fits 1 , 1 1/8 And Spline Prop Shafts While The Larger Puller Size Fits 1 1/4 Shafts. 90% Of Inboard Boat Props Are 1 Or 1 1/8 But We Recommend Verifying Your Prop Shaft Size. “This Particular Open Box C-Clamp Puller Fits 1 , 1 1/8 And Spline Prop Shafts.” The Prop Puller Is Designed To Work With 3 And 4 Blade Props. The Maximum Opening Is 4.5 From The End Of The Shaft To The Back Of The Prop. If You Do Not Have A Waterski Or Wakeboard Boat Measure The Distance Before You Purchase. Use Our Prop Finder Tool To Find The Prop Shaft Size Of Your Boat.

Why You Need It

Inboard Boats Have What Is Called A Tapered Shaft, Which Means The Diameter Of The Prop Shaft The Propeller Sits On Gets Larger Further Away From The End. That Taper Is Designed To Allow The Prop To “Seat” On The Shaft For Better Power Transmission, As The Prop Is Literally Forced Further Up The Shaft When Driving The Boat Forward In The Water.

That Taper Can Make It Extremely Difficult To Remove The Prop When Replacing Or Exchanging It With A New One. Many People Think The Prop Will Simply Slide Off Once The Cotter Pin And Nut Have Been Removed, And Are Frustrated To Find That Is Not The Case, Especially When Their Prop Is Damaged, And They Have A Replacement But Can’T Get The Ruined One Off.

Not Having A Prop Puller To Go With Your Spare Prop Is Akin To Not Having A Jack In Your Car; A Spare Tire Doesn’T Do You Any Good If You Can’T Get The Old Wheel/Tire Off To Replace It.

Acme’S C-Clamp Propeller Puller Is The Highest Quality Prop Puller Available, Constructed Of Drop Forged Aluminum For Durability And Strength, It’S A Tool You Will Buy One Time, And Use For As Long As You Own Inboard Boats.

Due To The Nature Of This Product, We Are Unable To Accept Returns. But Unfortunately, We Have Had Customers Take Advantage Of Our Return Policy On This Product After Using It, So We No Longer Accept Returns.

Please Check The Specifications Listed To Ensure This Puller Will Work For Your Application; It Is Sized Correctly To Work On Any Standard Watersports Towboat That Uses A 1 , 1-1/8 , 1-1/4 Or Spline Shaft. For Other Applications Please Measure First. Sorry For The Inconvenience, Please Contact Us If You Have Any Questions.