If You Have A 1999-2002 Tige 21V/2100V, And Want A Fully Automated Ballast System That Fills And Drains With A Switch, This Complete Reversible Pump Ballast Solution Is What You’Re Looking For. With A Perfect Fit, Maximum Capacity And Optimized Storage Efficiency, You Get The Best Performance Possible Behind The Boat, Combined With The Convenience Of Automated Filling And Draining To Make Your Time On The Water As Enjoyable As Possible.
If You’Re Looking For A Ballast Solution Combines The Perfect Wake Or Wave, With The Convenience Of Fully Automated Filling And Draining, This Upgrade For Your 1999-2002 Tige 21V/2100V Is What You Need.
Our Solution For Your Boat Includes:
- Ballast Bag Details & Specs
- Port Rear Exactfit 635Lb Ballast Bag: 55 L X 27 W X 19 H
- Starboard Rear Exactfitt 635Lb Ballast Bag: 55 L X 27 W X 19 H
- Exactfit 230Lb Bow Ballast Bag: 52 L X 57 W X 7 H
- All Necessary Plugs, Hoses, Wiring, And Pumps Based On Your Selection
- Front Option: Adds 230Lbs To The Bow Of The Boat
- Rear Option: Adds 1,270Lbs To The Rear Of The Boat
- Front Option: Adds 1,500Lbs To The Bow And Rear Of The Boat
- Pump Options:
- Wakemakers Guppy Reversible Ballast Pump
- Fill Rate: 75Lbs/Min
- Flow Rate: 680 Gallons Per Hour / 11.3 Gallons Per Minute
- Physical Dimensions: 7.95 L X 4.72 W X 3.54 H
- Inlet/Outlet: 1/2 Npt Internal Thread
- Self-Priming: Yes
- Safety Features: Ignition Protected
- Wakemakers Premium Plug-And-Wake Reversible Ballast Pump
- Fill Rate: 110Lbs/Min
- Flow Rate: 720 Gallons Per Hour / 12 Gallons Per Minute
- Physical Dimensions: 7.95 L X 4.72 W X 3.54 H
- Inlet/Outlet: 1 Hose Barb And 1/2 Npt Internal Thread
- Self-Priming: Yes
- Safety Features: Ignition Protected
- Wakemakers Premium Plug-And-Wake Reversible Ballast Pump
- Fill Rate: 133 Pounds/Min
- Flow Rate: 960 Gallons Per Hour / 16 Gallons Per Minute
- Physical Dimensions: 8 L X 4.75 W X 3.625 H
- Inlet/Outlet: 1 Hose Barb And 1/2 Npt Internal Thread
- Voltage/Max Current Draw: 12 Volt Dc, 19 Amps (Recommended Fuse Size: 25 Or 30 Amp)
- Self-Priming: Yes
- Safety Features: Ignition Protected
- Wakemakers Guppy Reversible Ballast Pump
Timer Module Option
The Achilles Heel Of Reversible Ballast Pump Systems Has Long Been That They Drain Below The Waterline, Therefore Making It Difficult To Know When To Turn Off The Pump(S). Our New Exclusive Timer Module Solves That Problem By Giving You The Ability To Pre-Set The Run Time Of The Pump(S), Causing Them To Automatically Shut Off When Finished Filling/Draining. This Helps To Prevent Possible Damage To The Pump And/Or Impeller. We Include A Timer Module For Each Zone, Or Pump, That You Select Automatically.
Boat Compatibility
This Solution Will Only Work With Boats That Do Not Have Above Floor Hard Tanks In The Rear Compartments. If Your Boat Already Has Factory Hard Ballast Tanks Installed In The Rear Lockers, You’Ll Want To Make Use Of One Of Our Ballast Upgrade Solutions Instead. Contact A Product Advisor If You Have Any Questions.
Wakemakers Plug-And-Wake Wiring Explained
Reviews
There are no reviews yet.